|
| |
Inksupply.com Continuous Flow Systems for Epson Stylus Color R260 printers come precharged or empty with the tubes attached and Auto Reset Chips. Estimated installation
time is 30 minutes. Cartridges draw ink from a set of 4 oz bottles kept next to the printer. Once installed, there is no need to ever buy R260
cartridges again.
This CFS unit is now supported by the following printers, R260, R280, R380, RX580, RX595, RX680.
|
| |
CFS R260 ink bottles go on right hand side.
|
Complete CFS Systems -
The complete system consists of a set of prefilled cartridges with tubes attached, installed auto
reset chips, 6 drilled bottle caps, 2 beige tubing clip, 6 four ounce bottles of Inksupply.com R260 dyebase
ink and installation instructions. This system has everything you need, inks
are included. Nothing extra to purchase.
|
| |
|
NOTE - This Claria equivalent dye base ink does not perform to the same specifications as the OEM ink. This ink meets similar
performance measures as our other dyebase inks. Extended longevity should not be expected with the use of dye ink. If you find
a source that makes this claim, please beware.
|
| |
|
Prefilled Continuous Flow Systems for the Epson Stylus Photo R260
|
| Buy |
CFS Part No. |
Ink
Included |
Cart
Type |
Description |
Installation
Directions |
Price
Complete |
 |
CFS-R260-D |
Dyebase Color Ink |
Prefilled |
More Info |
Directions |
$224.00 |
| |
|
This is an R260 Dyebase inkset. See below if you wish to purchase additional
color ink sets.
|
| |
Resetting -
The CFS for the R260 printer has Auto Reset chips on the cartridges. Resetting of the Epson monitoring system
is accomplished by powering off the printer, then turning it back on again once the printer has reported a low ink condition for any
of the color positions. It can also be reset by pressing the ink replacement button at each step in the ink replacement cycle.
|
|
| |
Empty Systems -
The empty system consists of a set of empty cartridges with tubes attached, installed auto reset chips, 6
drilled bottle caps, 2 beige tubing clip, a vacuum pump assembly for filling and installation instructions. The
inks are not included in the price. Select the inks you wish to use below or use any Epson compatible inks of your choice. These
cartridges will work fine with most dyebase, pigment, or dyesublimation inks. They will not work with solvent based inks.
|
| |
| Empty Continuous Flow Systems for the Epson Stylus Photo R260 |
| Buy |
Part No. |
Description |
Type |
Additional
Information |
Unit
Price |
|
CFS-R260-E |
Select Ink Below |
Empty CFS |
Directions |
$182.00 |
| |
Resetting -
The CFS for the R260 printer has Auto Reset chips on the cartridges. Resetting of the Epson monitoring system
is accomplished by powering off the printer, then turning it back on again.
|
Ink Selections for Epson Stylus Photo R260 -
Below we have listed the available inksets for the Epson R260. Note, if you plan on
starting with an empty cartridge set, you will need ink to fill them. If you don't want to do the filling, buy the prefilled systems at
the top of page. |
| |
| Ink Sets for the Epson Stylus Photo R260 Printer |
| Buy |
Ink Set No |
Description |
Bottle Size |
Additional
Information |
Set
Price |
|
D2-4-6SET |
MIS Claria 1400 Dyebase inkset, 6 Colors C,M,Y,K,Lc,Lm |
4 oz |
More Info |
$60.00 |
|
Note: For additional inks and larger bottles, visit the Epson Dye ink page.
|
|
| |
Spare Parts for CFS Systems -
Below are some recommended spare parts. If you need to upgrade your system or need to make
an ink change, these are the parts that are available. Be sure to visit the trouble shooting page before purchasing new parts. We
may have a solution for your difficulties. Troubleshooting Page
|
| |
| Spare Parts for Continuous Flows for the Epson Stylus Photo R260 |
| Buy |
Part No. |
Description |
Cart
Type |
Additional
Information |
Unit
Price |
|
CFC-R260-E |
Empty Cartridge Set With Tubes Attached |
Empty |
More Info |
$150.00 |
|
CFS-VP |
Vacuum Pump for filling empties |
No Carts |
More Info |
$10.00 |
|
CFC-R260-D |
Prefilled Dyebase cartridge set with tubes attached |
Prefilled |
More Info |
$155.00 |
| Note: For additional parts and accessories for CFS units, visit the CFS Parts page. |
© Copyright 2008 MIS Associates Inc. All Rights Reserved.
|
