| 5. |
Press Enter. |
| 6. |
The display reads: PLEASE REMOVE CARTRIDGES
Remove the cartridges. The display reads: PLEASE LOWER THE INK LEVER
Lower the ink levers. The display reads: PLEASE REMOVE CARTRIDGES
Press Enter. |
| 7. |
The display reads: CLEANING |
| 8. |
When the display reads: SET CLEANING JIG
Press Pause twice. |
| 9. |
The display reads: CHECK ADJUSTMENT
Press the Paper Source / Items button 5 times. |
| 10. |
The display reads: CHECK CLEANING
Press Enter. |
| 11. |
The display reads: CLEANING: STD.KK0
Press the Paper Source / Items button once. |
| 12. |
The display reads: INIT: FILL
Load the cleaning cartridge set and lower the ink levers. |
| 13. |
Press Enter. The printer primes with cleaning fluid. This process takes around
eight minutes.
When all activity has stopped, turn the machine Off. |
| 14. |
Turn the machine On. Perform a nozzle check.
The pattern will be very faint as the cleaning fluid is a clear solution.
Press the Clean button and after one clean, repeat the nozzle check.
This runs the cleaning fluid through the nozzles of the print head. |
| 15. |
Turn the printer Off. |
| 16. |
Repeat steps 1 - 13 replacing the cleaning cartridges with your new ink set.
Turn the machine Off. |
| 17. |
Turn the machine On. Load media and perform a nozzle test and, if necessary,
a head clean. When the pattern of the lines in the nozzle test is unbroken, you are
ready to print. |
