Search
Navigation
Shop By Printer
Join Our Newsletter
for Promos and Coupons
|
|
|
Other Customers Are
Buying These Products
COMPATIBLE BCI-6Y YELLOW INK TANK 6Y
Price: $5.00
COMPATIBLE BCI-6K BLACK INK TANK 6K
Price: $5.00
COMPATIBLE BCI-6C CYAN INK TANK 6C
Price: $5.00
7600 Ink Change Procedure
|
By using these instructions, you can avoid having to flush your printer with cleaning fluid. This
only applies if you are changing from original Epson inks to MIS inks.
|
Caution: Make sure your waste pad is not full or almost full before starting this procedure.
The changeover consumes approx. 1/4-1/3 of the waste tank and 1/4-1/3 of
a 110 ml cart. So, make sure your carts. are full and there is plenty of
room in the waste tank.
|
With the power off, install the cartridges. Hold down the Paper Feed Up, Down, and Enter
buttons (circled) and turn on the Power. (See figure 1)
Figure 1
Once you have done this, you will see the words; Check Test on the display with
an arrow pointing right. Press the Paper Feed Down button (circled) twice.(see Figure 2)
Figure 2
When the display reads.. Check with Cleaning and an arrow pointing to right,
press the Select Type (circled) button once. (see Figure 3)
Figure 3
Now the display should read, Cleaning with Std.KK0. Press the Paper Feed Down
(circled) button 3 times. (see Figure 4)
Figure 4
The display will now read, Cleaning with Init.Fill.
Figure 5
Pressing the Enter button (circled) will initiate the charging of MIS inks into your printer.
(see Figure 5)
Please note that you only need to do this once and in doing so, a portion of your Waste Ink
Tank is used.
This will take approximately 5 to 10 minutes. Once it is finished, please reboot the printer.
|
